Hardware

FMADIO 100G Hardware looks as follows

FMADIO100G Gen2 1U Packet Capture System

FMADIO 100G Gen2 1U Packet System Side

Spec Sheet

1MB

100G Gen2 Datasheet v5.pdf

PDF

Open

FMADIO100G Gen2 Spec Sheet

FMADIO 100G Gen2 Specsheet

Transceiver Support

List of known and tested transcivers that work with the system. Other transciver types should be ok, please check with [email protected] for clarification.

FMADIO Packet Capture systems are Transceiver Vendor neutral, 3rd party optics are fully supported.

Module	Speed	Connector	Cable Type	Brand
100G SR4	100Gbps	MPO12	OM4 MMF	Generic
100G LR4	100Gbps	LC	OS2 SMF	Generic Finisar FTLC1154RDPL
100G CWDM4	100Gbps	LC	OS2 SMF	Generic Finisar CTLC1157RGPL
100G SWDM4	100Gbps	LC	OM4 MMF	Generic Finisar FTLC9152RGPL
100G CR4	100Gbps	DAC	Passive Twinax	Generic
40G SR4	40Gbps	MPO12	OM4 MMF	Generic Finisar FTL410QE4C
40G LR4	40Gbps	LC	OS2 SMF	Generic
40G CR4	40Gbps	DAC	Passive Twinax	Generic

Rails installation

Installation of the rails is tool less please see the following instructions

Power Supply

System is installed with dual 1200W power supply. By default the system is configured as follows

Total Power Consumption	Behavior	LED
< 400W	HOT-STANDBY Only Primary PSU is active, Secondary PSU in standby mode	Primary, Solid Green Secondary, Green Blink
> 400W	HOT-HOT Both Primary and Secondary PSU are in active mode	Both Solid Green

FMADIO 100G PSU Configuration

The above behavior can be overridden to always be in HOT-HOT load balancing mode, with a configuration setting. Please contact [email protected] for more information

Power Consumption

FMADIO 100G 1U Analytics

Specification

Physical Dimensions:

• 438 x 43.5 x 730mm

• 17.2" x 1.7" x 28.7"

• (Designed for EIA 19” rack)

Weight:

• 26KG / 57 lbs

Color:

• Silver metallic

Power Supply:

• 2 x Redundant Hot swappable 1200W

• 110-240AC, 12-7A, 50-60Hz

Fan:

• 8 x 40x40x56mm (23,000rpm) Chassis

• 2 x 1 x 40x40x56mm (Power Supply)

Airflow:

• Front to back

Operating Conditions:

• Operating temperature: 10°C to 28°C

• Operating humidity: 8-80% (non-condensing)

Storage:

• 10 x U.2 NVMe Front panel drives

Network:

• 1 x IPMI BMC out of band management (RJ45)

• 2 x RJ45 Management ports

• 2 x SFP+(or QSFP+) High speed management ports

• 2 x QSFP28 Capture ports

• 1 x Serial port (RJ45 connector)

Platform:

• Dual socket Intel Xeon Platform

• DDR4 RDIMM RAM